The Buy Fencing Direct Blog
This problem is easily corrected with a little know-how!
- Firstly, use one nail at each end of the decking to to secure it to the end joists.
- If the deck board bows towards the last board laid and fastened, carefully force a chisel between the two boards and pry the bowed board outwards to the correct position, then nail or screw into place.
- If the bow curves outwards, away from the last board, you will need to drive the chisel into the joist on the outside of the curve until it is in the correct position and then nail or screw into place.
Before laying decking boards, it is important to get the decking sub-frame exactly right to ensure that you will have a firm and easy-to-maintain deck.
Here are a few simple steps to take, in order to make sure that your garden decking is structurally sound and will last for years.
Things to Consider When Building a Sub-Frame
Whilst it is always great to have the inside of your home just how you want it, there will come a time when you will also want to start to make the most of the outdoor space that you have. One great way to do this is to have some decking installed so that you can relax in the sun, have friends over for parties and barbeques or simply just revel in the envy that your friends show when they have seen it.
Having decking installed will not only allow you to make the most of your outdoor space but it will also add to the value of your home when you one day decide to move on to pastures new.
However, once you have made the decision to get your hands dirty and install some great looking decking, you will realise that it is not as simple as just picking a colour and deciding where to put it. You will first have to decide on what sort of decking material you are going to use.
This decision should be based on where you want to put it, what your budget is, how much use
Before you lay the decking, we would recommend that any remaining work to the sub-structure, such as applying protective finish, is completed before starting to lay the deck boards. Take a look at our guide on building the sub-frame.
The deck boards we supply are 28mm x 120mm in size which are the most desirable type of decking as they are less prone to sagging, warping, twisting or cupping.
The exact size of the deck boards is dictated by the area that you are looking to cover with decking, the joist span and the layout / pattern that you choose for garden decking project.
Before fastening any boards, lay out all but the last few boards on the joists, this way you will be able to see the final effect and make changes where necessary for the best appearance.
Position the deck boards ''bark side'' up to minimize the splitting / warping of the wood that can occur. The way to tell th
In time wood that is left untreated becomes that familiar silvery-grey colour with a rough, bark-like surface, as the grain gradually opens and lets in moisture. But be warned, wait this long and it may be almost impossible to reverse!
Instead, when timber is around one-year-old, sand off any old, flaking stain or dirt from the dry surface and apply an annual coat of good quality wood preservative. This will enrich and revitalise the surface of the wood just like a skin moisturiser. They also contain anti-fungicides that will help prevent rot, mould and lichens.
There is a wide choice of timber care products, some combining treatment with a coloured wood stain for extra impact.
To keep your timber decking ship-shape, you will ideally need to treat it regularly using a specialist deck treatment. We recommend that you carry this out once a year for the first two to three years after you first install the deck, and then just once every
Many homeowners dream of having a water feature in their garden; this can be a fountain, pond, waterfall, or even a stream. No matter the type of feature, water is a beautiful and striking addition to any garden. There are a number of DIY water feature kits on the market to choose from, as well as any number of other DIY water feature ideas to create from scratch.
The DIY water feature can range from a very simple project to a very elaborate scheme. No matter their simplicity or their extravagance, DIY water features can be quite soothing and eye-catching, especially when they have some form of running water. DIY water features can be relatively inexpensive and require just a bit of elbow grease or they can be quite expensive and require a lot more sweat equity. Below are two examples of DIY water features that are both practical and intermediate in difficulty. They do take a bit of elbow grease but will produce a water feature that will be the envy of the neighbours.
All decks involve some basic construction techniques to ensure that the finished project will provide many years of service.
Weather resistant screws and galvanised nails and bolts should be used for your decking project; these will prevent rust from discolouring your deck.
Drill pilot holes
It is a good idea to drill pilot holes for your fasteners especially when nailing near the edge or end of a board.
Space deck boards evenly
Spacing deck boards 3-5mm apart will allow for and natural movement of the timber as it takes on, or loses moisture.
Use an end coat preservative
On all saw cuts and drill holes.
Apply weather resistant finish
Our pressure treated timber is guaranteed against rot for 15 years, but adding a weather resistant finish will increase the longevity of colour and finish of your deck.
Any deck can benefit from railings. The boundaries and the visual lines that the balustrades create adds a sense of enclosure, privacy and safety.
Most building regulations require that any decks that are built 30'' or higher have railings that are 36'' to 42'' high and that all stairs that are greater than 4 treads have a railing on each open side.
Installing balustrades and rails
- First, measure the distance between the posts at the base rail and cut the handrails and base rails accordingly to the length required.
- Position and fix the bottom rail, then using your baluster length as a guide, position and then fix the top handrail.
- Attach all the balusters to the deck rails at intervals not exceeding 100mm (4”).
There are many reasons that people shop farmer’s markets or grow their own vegetables in backyard gardens. While the various products offered may, and usually do, look less attractive than the ones found in the grocer’s, they more than make up for it in taste and freshness. Farmer’s market fare and back yard vegetables aren’t waxed, are usually picked at the perfect time, and are frequently organic (especially the ones you grow yourself).
While many people enjoy the taste of fresh home grown vegetables, not everyone has an area large enough for a garden plot. At least that is the common misconception. In truth, growing your own vegetables is easy to do even in very small spaces, like decking, patios and balconies.
The advantages of small gardens
Of course the most obvious reason is that you have a steady source of fresh vegetables and herbs at your disposal during the entire growing season. Plus with only a few exceptions you can gro
You do not have to seal yourself into the home for months awaiting a warmer climate, you can get out in the garden, enjoy it despite the cold and dark and even enjoy a little bit of gardening.
So if you are of the type of person that does not want to say goodbye to the garden just yet, take a look at what you could be doing on the other side of the curtains.
What to do in your garden during winter
It might be on the chilly side over the winter months but this does not mean that you cannot still enjoy your outside space. There are a number of things you can do in your garden over the winter including planting certain crops and vegetables, hosting barbeques and even a party or two.
To make any outside activity that little bit more comfortable during winter, you can simply bring some heat and light to the occasion.
Purchase patio heaters
These are a great way of making it much cosier when you are sitting on your patio or decking. They